When chipper blades start to dull, the whole job feels it.
Feed performance drops, the machine has to work harder, and blades may need to be replaced or professionally sharpened sooner than they should. ArborEdge gives crews and equipment managers a practical way to touch up chipper blades on the machine so they can maintain cutting performance, reduce downtime, and get more value from the blades they already have.
No Blade Removal
No Anvil Reset
No Balance Issues
Find the Right Tool For Your Chipper
Top Face Abrasive Tool
Designed for horizontal drum-style chippers where the blade’s 30-degree cutting edge is accessible from the top.
The CBN-coated tool quickly restores a dull cutting edge without removing the blade from the machine, helping improve cutting efficiency and extend the time between professional sharpenings.
Back Face Abrasive Tool
Designed for vertical-disc style chippers where the blade’s 30-degree cutting edge faces away and must be accessed from the back side.
The CBN-coated tool quickly restores a dull cutting edge without removing the blade from the machine, helping improve cutting efficiency and extend the time between professional sharpenings.
Both tools improve cutting efficiency in only seconds and significantly lengthen the time between professional sharpenings.
Important Our Chipper Blade Sharpening Tools use a Cubic Boron Nitride abrasive that is designed to cut hardened steel. Using these tools to cut or sharpen carbide will quickly render your tool useless.
Not Sure Which One to Choose?
Reach out to us with your questions and we’ll point you in the right direction for the tool that makes sense for your setup.
Contact Our TeamSo Does Downtime.
A dull blade does not just cut less effectively, it can slow workflow, reduce efficiency, and create more stress on the machine resulting in costly repairs and downtime.
ArborEdge gives you a practical way to sharpen your chipper blades while they are still on the machine, without the hassle of removing bolts or adjusting anvils. That makes it easier to keep blades sharper longer between professional sharpenings or replacements.
Why That Matters:
Sharpen right on the machine without having to remove blades
Maintain continuous cutting performance
Minimum material removal (millimeters) maintains blade balance
Get longer blade life, reducing cost.
No need to readjust the anvil after sharpening
Helps reduce unnecessary downtime
Built for the Way You Work
ArborEdge gives everyone who runs a chipper a practical way to stay ahead of wear before it turns into lost time, rising costs, and frustrated operators.
A Simple PlanFor Tree Care Companies
Keep Jobs Moving Without Overworking the Machine
For tree crews, dull chipper blades mean slower feeding, rougher chips, higher fuel use, and more strain on the machine.
ArborEdge helps crews stay ahead of that drop in performance with a maintenance step that is practical, takes very little time, and can be done in the field or the shop.
Why It Matters:
Get more usable life from every blade
Keep chipping jobs moving faster
Delay professional sharpening or replacement
Reduce strain on the chipper
Help control fuel waste
For Rental Companies
Send Equipment Out
Ready to Perform
Rental customers notice dull blades right away. The chipper feeds slower, works harder, and creates a frustrating experience.
ArborEdge helps rental operations touch up blades between rentals so equipment goes back out performing better and putting less unnecessary strain on your equipment.
Why It Matters:
Improve equipment performance between rentals
Reduce avoidable blade replacement
Help protect the chipper from excess wear
Improve renter satisfaction
Add a simple maintenance step to turnaround
Frequently Asked Questions
The back-face abrasive tool is the best fit for a disc wheel chipper because the cutting surface is often more difficult to reach from the front through the disc window.
The top-face abrasive tool is typically the better choice for drum-style chippers because the blade setup is usually easier to access from the top.
On many disc wheel chippers, the cutting surface is harder to reach from the front. The back-faced abrasive tool is designed to solve that access issue and make sharpening more practical.
If access to the blade can be achieved through the disc window, yes. If access is limited, the back-face abrasive tool is the better option for horizontal disc chippers because it makes sharpening the blade's edge more accessible.
Yes. Maintaining your chipper blades edge will significantly extend (by a factor of 5) the time needed for blades to be professionally ground/sharpened. All without worrying about balance, adjusting anvils and putting excessive strain on your equipment
A more consistent maintenance routine is one of the best ways. ArborEdge helps you touch up blades before cutting performance drops off, which can significantly extend blade life.
No. ArborEdge helps maintain a chipper blades performance between full sharpenings. It is a practical maintenance tool, not a complete replacement for full professional sharpening when that is needed.